Stile Odessa

• Surfaces & Finishes

  All Stile floors are finished with Bona low VOC water-based polyurethanes. All Stile stock materials are finished in matte. Various gloss levels are available via custom order from Italy.

  Stile stock materials have either a smooth, light brushed, or brushed surface, as noted above for each material. Additional surface textures are available via custom order from Italy.

• Dimensions & Formats

  ENGINEERED WOOD

  • Standard thickness is 5/8"
    Additional thicknesses available upon request
  • Standard plank width is 7" wide
    Additional widths are available for most Stile specs, ranging from 2.75″ (70mm) – 12″ (300mm) 
  • Standard plank lengths are 5′ – 8′ random lengths
    Longer lengths & length groupings available upon request
  • 5/8″ thick engineered material has a 4 mm hardwood top layer
  • 3/4″ thick engineered material is available with either a 4mm or 6mm hardwood top layer

  Plank & pattern OPTIONS

  • Single-width planks
  • Mixed-width planks 
  • Chevron
  • Herringbone
  • Parquetry patterns
  • Custom patterns/designs
• Installation Methods

  Installation methods vary depending on wood format and site conditions, but here are some general guidelines:

  • Engineered wood is typically glued down to concrete or plywood subfloors, with or without an underlayment such a sound abating mat or a moisture barrier, depending on site conditions/requirements. 
  • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
  • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.