Patina Studio Beartooth

• Surfaces & Finishes

  All materials in the Patina Studio line are hand-finished with an extra-matte, low VOC, water-based polyurethane, applied over a lightly brushed European Oak.

• Dimensions & Formats

  Patina Studio materials are available in a 5/8" thick engineered format with a 4mm top layer. The standard width is 7" and lengths range from 2-10', consisting of primarily longer lengths. Custom widths, herringbone, and chevron are available upon request.

  PLANK & PATTERN OPTIONS

  • Single-width planks
  • Herringbone
  • Chevron
• Installation Methods

  Installation methods vary depending on wood format and site conditions, but here are some general guidelines:

  - Engineered wood is typically glued to concrete or plywood subfloors, with or without an underlayment such as a sound abating mat or a moisture barrier, depending on site conditions/requirements.

  - If the plank is particularly wide, gluing and nailing is always good practice if possible.

  - Engineered floors are typically the best choice for gluing down over radiant heat installations.

  - Always follow the appropriate NWFA (National Wood Flooring Association) protocols for the installation of any LV Wood material.