Heritage Hickory

• Surfaces & Finishes

  Our Heritage floors are finished with either a low VOC water-based polyurethane in 2 gloss levels - matte or satin - or an all natural VOC free flax-based oil.

• Dimensions & Formats

  SOLID WOOD

  • Standard thickness is 3/4″
    Custom thickness upon request
  • Standard plank widths range from 3″ – 12″ wide
    Wider boards available upon request
  • Standard plank lengths are 2′ – 10′ random lengths
    Longer lengths & length groupings available upon request

  ENGINEERED WOOD

  • Standard Thickness 3/4"
    custom thickness upon request
  • Standard plank widths range from 3″ – 12″ wide
    Wider boards available upon request
  • Standard plank lengths are 2′ – 10′ random lengths
    Longer lengths & length groupings available upon request
  • 5/8″ thick engineered material has a 4 mm hardwood top layer
  • 3/4″ thick engineered material is available with either a 4mm or 6mm hardwood top layer

  Plank & pattern OPTIONS

  • Single-width planks
  • Mixed-width planks 
  • Chevron
  • Herringbone
  • Parquetry patterns
  • Custom patterns/designs
• Installation Methods

  Installation methods vary depending on wood format and site conditions, but here are some general guidelines:

  • Solid wood is typically nailed, or nailed and glued, to a plywood subfloor.
  • ​Engineered wood is typically glued down to concrete or plywood subfloors, with or without an underlayment such a sound abating mat or a moisture barrier, depending on site conditions/requirements. 
  • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
  • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.