Euro Oak Kaaterskill

• Surfaces & Finishes

  Euro Oak Kaaterskill has a smooth surface texture, finished with a UV Cured matte, low VOC, water-based poly.

• Dimensions & Formats

  Euro Oak Kaaterskill standard format is engineered 3/4" thick x 7" wide with a 6mm hardwood top layer, however, the formats listed below are also available upon request.

  ENGINEERED WOOD

  • Standard Thickness 3/4" or 5/8"
  • Standard plank widths are 5", 7", 8 5/8", 10 1/4"
    Wider boards available upon request
  • Standard plank lengths are 2′ – 10′ random lengths, with 50% being full length at 10', and 80% being 6'-10'. 
    Longer lengths & length groupings available upon request
  • 5/8″ thick engineered material has a 4 mm hardwood top layer
  • 3/4″ thick engineered material has a 6mm hardwood top layer

  Plank & pattern OPTIONS

  • Single-width planks
  • Mixed-width planks 
  • Chevron
  • Herringbone
  • Parquetry patterns
  • Custom patterns/designs
• Installation Methods

  Installation methods vary depending on wood format and site conditions, but here are some general guidelines:

  • Solid wood is typically nailed, or nailed and glued, to a plywood subfloor.
  • ​Engineered wood is typically glued down to concrete or plywood subfloors, with or without an underlayment such a sound abating mat or a moisture barrier, depending on site conditions/requirements. 
  • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
  • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.